Save Space with Light Duty Two Post Lifts
Whether symmetrical or asymmetrical, with or without pads, for compact cars or trucks up to 12,000 lbs., Rotary has the light duty two post lifts to suit your repair needs.
Rotary Two Post Asymmetrical Lifts
The Rotary two post asymmetrical lift is a true asymmetric, with columns at rotated 30°. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column. “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing.
Other features include:
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 10,000 lbs. capacity
Options:
Download Rotary Two Post Asymmetrical Lift Brochure
Rotary Two Post Symmetrical Lift
The Rotary two post symmetrical lift is a true symmetric column design. The “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing.
Other features include:
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 10,000 lbs. capacities
Options:
Download Rotary Two Post Symmetrical Lifts Brochure
Rotary Pad Lift
The Rotary pad lift is a true asymmetric, with columns at rotated 30°. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column. This “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing.
Other features include:
- Pads allow for quicker vehicle spotting and greater vehicle throughput
- Single point lock release which releases the locks at the same time
- Two full stroke cylinders, one in each column
- Single point lock release which releases the locks at the same time
- Arm restraints on each arm engage when the vehicle is lifted
- Third party certified
- 7,000 lbs. capacity
Options:
Download Rotary Two Post Pad Lift Brochure
All Rotary Two Post Lifts can be equipped with Shockwave technology!
Shockwave Equipped Rotary Lifts come standard with the SPEED, CHOICE & RETURN on investment that will help you achieve your goals of greater technician productivity and higher profits.
Designed specifically for bays where service speed is paramount, Shockwave equipped lifts are the fastest in the world; helping you keep step with the ever changing demands in the vehicle service industry.
This innovative, industry changing technology is only available from Rotary, the world’s most trusted lift.
Download the Rotary Shockwave Brochure
Revolution RTP9 Two Post Lift
The Revolution Lift RTP9 is a 9,000 lbs. capacity symmetric 2 post lift. The RTP9 is one of the most popular automotive lifts we sell. It comes with a free set of truck adapters and all of the mounting hardware.
Features:
- 9,000 lbs. capacity lift for facilities with low ceilings
- Dual hydraulic cylinders with chains
- Carriage latch system engages every 3″
- Secondary lock system includes a spring actuated slack chain locking device
- Truck adapters included
- ALI Certified
Specifications:
- Capacity 9,000 lbs.
- Rise w/ Extensions 80-1/2″
- Rise w/out Extensions 72″
- Overall Height 111-1/4″
- Overall Width 138-1/2″
- Drive Through Clearance 97-1/4″
- Width Inside Columns 111″
- Arm Reach (Min/Max) 30″ / 46-1/4″
- Min. Adapter Height 3-1/2″
- Driver-Over Height 1-1/2″
- Voltage/Amps 208/230, 20 Amps
- Motor 2 HP
- Min. Ceiling Height 113″ (9′-5″)
Revolution RTP10 Two Post Lift
The Revolution Lift RTP10 is a commercial grade 10,000 lbs. capacity 2 post lift. The RTP10 allows a customer to lift a vehicle either symmetrically or asymmetrically. It comes with a free set of truck adapters (mounting hardware optional).
Features:
- Overhead padded switch bar to avoid vehicle damage from being raised too high
- 3-Stage front arm design enables you to position vehicle doors in front of or behind columns to avoid door damage
- Top mounted pull design hydraulic cylinder. The piston rod is protected behind the carriage to prevent damage
- Overhead cable equalization
- Spring operated arm restraints, disengage at floor level
- Single point lock release
- Two full-stroke cylinders with overhead cable for equalization
- Large rubber-padded swivel truck adapters with extra height extensions are standard.
- ALI Certified
Specifications:
- Capacity 10,000 lbs.
- Rise 77″
- Overall Height 143-1/8″
- Overall Width 131″ (optional 137″)
- Drive Through Clearance 97″ (optional 103″)
- Overhead Switch Height 136-1/4″
- Front Arm Reach (Min/Max) 23″ / 44-1/2″
- Rear Arm Reach (Min/Max) 38-7/8″ / 58″
- Min. Adapter Height 3-5/8″ / 10″
- Width Inside Columns 109-3/4″ (optional 115-3/4″)
- Voltage/Amps 208/230, 20 Amps
- Motor / Phase 2 HP / 2 HP / 10*
- Min. Ceiling Height 144″
Revolution RTP12 Two Post Lift
The Revolution Lift RTP12 is a commercial grade 12, 000 lbs. capacity 2 post lift. It comes with large rubber-padded swivel adapters with extra height extensions.
Features:
- 12,000 lbs. capacity for raising most passenger cars, trucks and vans.
- Hydraulic cylinders in each column, Full Stroke, Cylinder rod concealed inside carriage
- Overhead cable equalization
- Single Point lock release
- Large rubber-padded swivel adapter with extra height extensions (4-1/2″ and 8-1/2″) are standard
- Spring operated arm restraints, disengage at floor level
- Padded overhead height limit switch bar
- ALI Certified
Specifications:
- Capacity 12,000 lbs.
- Rise 82-1/2″ with adapters
- Adjustable Overall Height 165-1/4″ / 177″ (high setup)
- Overall Width 150-3/8″
- Drive Through Clearance 109-1/2″
- Overhead Switch Height 159-3/8″ low / 169-1/2″ high
- Front Arm Reach (Min/Max) 38-1/2″ / 57-1/2″
- Rear Arm Reach (Min/Max) 38-1/2″ / 57-1/2″
- Lifting Pad Height 6″ / 10-1/2″ w/short extension / 14-1/2″ w/high extension
- Width Inside Columns 123-1/4″
- Voltage/Amps 208/230, 20 Amps
- Motor 2 HP / 2 HP / 10* *optional 3-phase available
- Speed of Rise 60 seconds
